Finally a affordable CNC plasma table Crossfire from Langmuir systems

1. Here's some helpful videos I have found on Fusion 360, These videos I found to be the most helpful for me to learn how to use Fusion 360 fairly quickly by following along. If you like the videos, help the guy out by clicking (like) and leave him a nice comment! Fusion 360 learning to draw plus tool paths https://youtu.be/7b5kpeV6y5M
   Part 1 practicing Fusion 360 https://youtu.be/tF0slQ5FbmA
   Part 2 practicing fusion 360 https://youtu.be/Sy55EeiYYrU
   PS he is a school teacher and these videos were made for his class.
   Here’s an affiliate link to the Crossfire website if you are interested in checking out the table
   http://store.langmuirsystems.com/?aff=16
   Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table!

   *After Running the Titanium Plasma 45 for 3 years it's held up great! But I feel the Hynade CUT 60 CNC Plasma with blow back pilot arc start offers much better value and is PLUG and PLAY CNC ready**
   
   Amazon Paid affiliate links below
   
   Hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN) https://amzn.to/3DEzR2m

2. man i cant wait to get one of these for when i get my custom metal fab business going

3. good machine

4. Any local dealers? All I could find is overseas

5. Is 1500 just for the table or does it include the torch?

6. Is there any unbiased videos from someone who actually purchased this and isn't paid by the manufacturer?

7. oh thx for sharing!!!! I was dreaming for my own plasma CNC for hobbiest

8. Is this only for steel?

9. mike you are the best

10. This question is for anyone.

    I'm curious about the unsupported end of the X-axis. Has anyone experienced backlash/whip? Or any problems with deflection (being pulled down) when the Z-axis carriage gets to that end? Those are my main concerns. Those probably aren't issues, but I feel like I should ask before buying.

    Thanks to anyone who answers.

11. I'd love to know where the videos are. Putting this together has been a nightmare

12. How mouch just the arm

13. Add strategic tabs to avoid tip ups in small parts

14. be careful ordering I'm 3 months into it without seeing my system and they have my money I hope they actually sent it I got 2 grand in it and I'm pore so hope they come through. also they have no payday so the can f you if they want

15. do you have a video of wiring the thc controller?

16. Thanks for this great video! Thinking about getting something like this!

17. Curious if you would share your toolset for the titanium 45. Complete newbie here and it would be so helpful in getting started. Thank you

18. Hi i have been trying to get information if you can run the titanium plasma cutter on a generator or if its generator friendly? Also what type of computer do you need to run that software or canyou use an apple tablet?

19. Hi i have been trying to get information if you can run the titanium plasma cutter on a generator or if its generator friendly? Also what type of computer do you need to run that software or canyou use an apple tablet?

20. Hi i have been trying to get information if you can run the titanium plasma cutter on a generator or if its generator friendly? Also what type of computer do you need to run that software or canyou use an apple tablet?

21. As a cnc machinist. I'm very impressed.

22. It looks like the gantry and the torch holder have a lot of height adjustment. Would it be possible to put a square tube on the table and cut on the up facing flat surface?

23. i like your CNC plasma table..great addition to the shop..thank you Mike for share..

24. Thanks for the Discount Code on the CNC, just ordered it. Cant wait.

25. Great video, thank you.

26. Hi Mike, I have the same exact set as you do here. Having a problem with the torch staying on in between cuts leaving marks. Any help would be appreciated. Thanks

27. I wired my Titanium the same exact way, but when I turn it on I get F05 error which means the torch is firing when turned on. What could I have done wrong?

28. I've got to get one of these!!!

29. What compressor are you using with this set up ?

30. Are you taking jobs now? I got one i think you can do. Give me your info? Or call me 501-612-2993

31. how is the smell in a closed garage for guys just playing at home? would love to have one, but dont want to poison myself – thanks for any advice.

32. COOL,I love your channel, I purchased the same one from newigstyle..com three days ago, delivery by Fedex,wonderful quality !!!!!

33. This thing is awesome. Definitely going to get one or something similar when I can.

34. What software are you using, I am finding so many issues with fusion 360, getting completely annoyed!

35. Hi Mike. Great video and I’ve watched it like 10 times. I just set up a new crossfire pro and went with the razorcut 45 plasma because of the plug and play promise. Turns out they have a big run of units with misfire issues and instead of replacing them they want you to repair them yourself. So I’m returning my plasma cutter and am now looking at the same HF machine you are using in this video. Can I ask how it has performed over the last year? Any misfires? Problems? Thank you so much Dan

36. If you use fusion 360 can you do any flat design? Or are there limitations on the code??

37. This is such a good video. Great work mate, I’ll appreciate it even more once I get myself up and running. Cheers!

38. I was wondering how hard this to use/learn, I have no experience at all. Do you know anyplace to get hands on training? I liked your videos

39. Would a cut-40 be sufficient to use with this table?

40. Mike, what laptop did you finally purchase to run the software for your new table?

41. Outstanding video Mike. Being able to duplicate a part and making slots has always been tricky; even for a experienced fabricator. ?

42. What are you running for air pressure on the plasma cutter? And what kind of compressor? Thanks!

43. Thanks for your videos, I had no idea metal fabrication was this approachable.

44. Fuison does take little but man its awsome

45. How thick of material will the Titanium 45 plasma cut?

46. Almost a year later, how is your machine running? Any major issues? How often did you have to replace the consumables on your torch?

47. Would you be willing to sell or share your tool setup for the titanium 45? Using sheet cam

Comments are closed.