16.5 C
Monday, September 25, 2023
HomeMini CNC MachineDIY Mini CNC Engraving Machine | Arduino based CNC Router machine

DIY Mini CNC Engraving Machine | Arduino based CNC Router machine


Related stories


$2/5pcs 2Layer & $5/5pcs 4Layer PCBs: https://jlcpcb.com

Hello friends in this video I have made a mini CNC engraving/milling machine. this machine based on arduino and GRBL firmware.
12mm plywood is used to make the frame of this machine and nema17 stepper motor is used for all three axis.
8mm smooth rod & T8 lead screw is used for all axis
500W spindle is used which is quite enough for this job.
I have tested it on wood, acrylic, and PCB it works well not tested on alu. but shallow cuts with high quality of endmill done the job I think.

All the dimension details of machine and components list available on my website please visit below link.

DIY CNC Engraving Machine

How to generate G-code for this CNC machine

?visit for more projects :-
?FB page :- https://www.facebook.com/InnovativeMr/ This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate.



- Never miss a story with notifications

- Gain full access to our premium content

- Browse free from up to 5 devices at once

Latest stories



  1. This setup might be suitable for cutting vulcanized fiberboard pieces of guitar pickup flatwork if a low-power cutting laser was used instead of a router head. Even with very fine bits, there's tear-out even with very small, very sharp cutters. Fred Stuart has a purpose-built laser cutter for making flatwork that he demonstrated in a video several years ago (maybe 10+), and the flatwork come out beautifully. Preferable to dies and a punch press, given the cost of that kind of setup (only useful for large production runs anyhow). This looks like just the machine for the job. It would actually only need to be 2 axis, X and Y, since the material is flat and not very thick.

  2. لديك كل هذه الادوات و في النهاية تصنع الةcnc ما الفائدة اشتريها ارخص من ان تشتري كل هذه المعدات لصنعها

  3. Hi,

    Thanks a lot, its really greate effort and great knowledge.

    i need to do a project for a preset position linear actuator with a DC motor abd a stepper motor, with Arduino Mega or UNO but i am not able to write the code and the scheme, can you please help.


Comments are closed.