19.9 C
Monday, September 25, 2023
HomeCNC milling machineDesktop Cnc Mill with a unique Tool Changer - Carvera Cnc...

Desktop Cnc Mill with a unique Tool Changer – Carvera Cnc Machine Review


Related stories


This is a review of the Makera Carvera desktop cnc mill. It features a unique tool changer, wireless probe, anchor based tool holding system, laser and built in dust extraction. It is absolutely packed with features.

Please note that parts of this video are increased in speed to make it less boring, for example the footage of auto levelling. The footage of milling is at normal speed.


Please take care and understand the potential risks involved with participation in a Kick starter campaign.

The review item was provided free of charge by the manufacturer for this review




- Never miss a story with notifications

- Gain full access to our premium content

- Browse free from up to 5 devices at once

Latest stories



  1. Since this video Carvera has improved the dust collection bin, added an external dust port, changed the Y axis linear shaft to 25mm, added an external estop switch, an x, y ,z probe, M8/M9 air flow control and a laser protection film.

  2. im starting to think this is a Kickstarter scam ?‍♂️ no updates,its verry little money they wanted for the funding and its not a machine anyone would my , it cant mill alu etc, it only has 200w and can only run 1/8" tooling
    also there are no vids of people making their own projects and there are quite a few parts that seem to be stuck on it "just because "

  3. tell us the price before u tell us about its function because if price is high no use of having it one can buy high price product from various company

  4. Lot of room for optimization. Why measure the length of the touch off probe when that is essentially its job, in fact, why measure anything twice when it is the same tool.

  5. It's difficult to tell from a video, but how would you rate the noise level when cutting aluminium and engineering plastics?

    My last machine, a Heiz 720, used a Kress 1050. It was a good machine but very noisy. Where I am now I need something much quieter. Really, I need more of a mill than a router but the cost of a CNC mill is too high. This machine might suit.

  6. What an amazing robot!
    It looks like the price is reasonable too (as of this video). I saw a different machine that, compared to this, is super basic and it cost a lot more.

  7. Notice how the entire gantry/chassis is mobile and not fixed? Although it has dust collection there is no way that particles will not get in between that gap……unless they have boots that prevent it.

  8. Cool machine. I wouldn't be using the laser tool without protective hood on machine and eye wear. Being blinded with science makes for a good song but not in real life.

  9. Tool changer, 4th axis, dream machine ?. Well im gona finish my own some day.
    Just need to put in the Hours.
    The only bad part i can see is the tools not being in a box/drawer. Particles can easly lay ontop of tool. Or does it revers vacuum to clean them of..i think it does!
    Its nice to see a proper machine with metal, more metal and some cool add-ons included.

    Hum i wonder howlong until we start seing tool changing arms with air power toolchange (like a workshop cnc)

  10. That tail stock thread being cut the wrong way is a definite NO for me. Everything else could be perfect but watching Naomi wu get it wrong due to muscle memory was a deal breaker. Not sure why I'm watching this in that case. They should fix that.

Comments are closed.