16.2 C
Wednesday, October 4, 2023
HomeCNC Plasma CuttersCNC Plasma Cutting Machine Ride Along

CNC Plasma Cutting Machine Ride Along


Related stories


We taped a video camera to the gantry on our Torchmate CNC Plasma Cutting Table for a ride along while it was cutting. Here you can see the plasma cutter going up and down using the Arc Voltage Torch Height Control. The plasma cutter fires at a higher pierce height and then drops to the proper cut height prior to moving. In the video we are cutting out the plates we use to build the Torchmate 2×2 CNC Prototyping System Water Tables out of 3/16″ thick mild steel. For more information go to http://www.torchmate.com.



- Never miss a story with notifications

- Gain full access to our premium content

- Browse free from up to 5 devices at once

Latest stories



  1. hi is there someone who wants to explain how sensitivity in plasma arc works ,what couses the torch to lift up when you activate the sensor is the speed ?the volts? i will realy appreciate if you respond tnks.

  2. Will this torch height control work with a 6 axis robot plasma cutter? I cut some pretty complex parts from press formed 10 gauge stainless steel and setting the plasma tip spacing can be a nightmare sometimes.

Comments are closed.