16.2 C
Wednesday, October 4, 2023
HomeCNC Plasma CuttersBudget DIY CNC Plasma Cutter || Cutting Some Metal

Budget DIY CNC Plasma Cutter || Cutting Some Metal


Related stories


First cuts and commissioning on the plasma cutter

Plans – https://jdsgarage.bigcartel.com/

Plasma Cutter: https://www.amazon.com/dp/B07Y3Y12VF/ref=sspa_dk_detail_0?pd_rd_i=B07FWR1QXF&pd_rd_w=BABxf&pf_rd_p=b9951ce4-3bd8-4b04-9123-0fda35d6155e&pd_rd_wg=o7iVY&pf_rd_r=0P32H06AMQ9TY9YJJQQM&pd_rd_r=c2835e49-2586-4eb5-ac0a-92f54b8ffce2&s=industrial&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSk1ETFA1VjZTUU5DJmVuY3J5cHRlZElkPUExMDQ0OTY5UVBYUVBXVlBITllKJmVuY3J5cHRlZEFkSWQ9QTA3NTI1MTgxR000T0FUV04zNDlMJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

For all inquires email us jsaction4[at]gmail.com

#CNC #Plasmacutter #DIY



- Never miss a story with notifications

- Gain full access to our premium content

- Browse free from up to 5 devices at once

Latest stories



  1. Thanks. I have build the MPCNC frame. I was going to use it with a palm router. But it is not stout enough so I bought a Longmill CNC machine. I plan on making the MPCNC into a CNC plasma machine. I am looking for the right plasma cutter to use.

  2. Hey guys, this is from your neighbor down the street, would it be possible to add one more axis to the plans to control the depth of cut and turn it in to a wood cutting CNC?
    Todd S.

  3. What amps are you cutting at?
    Usually most CNC plasmas are set up to run at the max amps for the fitted consumables, and only the speed is changed for various thicknesses.
    (All within reason of course, fitting 120 amp consumables and running 120 amps to cut 3/32 material is not)

    But 30 amps for plate thinner then 2 mm, 40 amps for 2 to 5 and 55 amps for 5 to 10mm (as an example)akes away a lot of variables, as within the ranges you choose you just have to slow down on thicker material in the range,and run faster on thinner material in the range.

Comments are closed.